Manti Ceramic is not a single generic material: it is a range of low-thickness solutions with different uses, to be read together with technical data sheets, test reports, application manuals and performance documentation available for the specific version.<\/p>\n
The DoP, Declaration of Performance, is the document that accompanies construction products subject to CE marking and reports the performance declared by the manufacturer. In the case of Manti Ceramic nanotechnology insulation products, it helps designers, contractors and site managers verify performance characteristics, technical documentation and the correct framework of the application cycle. The documents can be downloaded from the website.<\/a><\/strong><\/p>\n In the market for low-thickness nanotechnology insulation, technical documentation is one of the few objective elements that can help distinguish a product actually designed for the construction sector from a generic coating with performance claims that are difficult to verify.<\/p>\n For this reason, the DoP for nanotechnology insulation<\/strong> \u2014 correctly referred to as DoPC under the new European Regulation 3110\/2024 \u2014 should be considered, when required and available for the specific product, together with the complete technical file.<\/p>\n In the case of Manti Ceramic, the point is not to state generically that \u201ca certification exists\u201d, but to verify which data are available for the selected version, which thickness they refer to and which application they can be used for.<\/p>\n For professionals and contractors, this is a practical step: it helps determine whether the product is suitable for an internal wall, a fa\u00e7ade, a thermal bridge, a historic surface, a metal roof or an industrial substrate. Documentation does not replace technical assessment, but it allows that assessment to be carried out on more solid grounds.<\/p>\n Manti Ceramic High Density Data Sheet<\/a> With nanotechnology insulation, performance data should not be read separately from the application context. A thermal conductivity value, an SRI index, a reaction-to-fire class or a permeability value is useful only if it is connected to the correct product, the specified thickness and the indicated application cycle.<\/p>\n For Manti Ceramic, this is especially important because the range includes different formulations. A paste version for masonry does not have the same use as a semi-liquid version for thermal bridges or a technical product for sheet metal and roofs. The documentation must therefore be checked against the version actually used on site.<\/p>\n A correct reading starts with a few technical questions:<\/p>\n This is the practical relationship between DoP for nanotechnology insulation<\/strong> and Manti Ceramic: not an abstract regulatory reference, but a consistency check between product, declared performance and real application.<\/p>\n Manti Ceramic is suitable for low-thickness nanotechnology insulation interventions on residential buildings, external surfaces, architectural details and indoor environments.<\/p>\n Savenergy.it offers Manti Ceramic as a range of low-thickness nanotechnology insulation products for residential and commercial construction, complex surfaces and technical applications. The version must be selected before assessing the documentation, because each product has a specific field of use. In addition, the DoP for Manti Ceramic nanotechnology insulation can be downloaded from the website.<\/p>\n Manti Ceramic High Density is the paste solution indicated for internal and external masonry, vertical walls and interventions where a greater thickness is required compared to the more liquid versions.<\/p>\n It is suitable when the project requires a thermal micro-coating on a masonry substrate, with an application cycle similar to a technical skim coat. In this case, the documentation must be read in relation to thickness, build-up, finish and substrate preparation.<\/p>\n Thermal conductivity: \u03bbd = 0.0010 W\/mK, certified by T\u00dcV – Test R 1995870<\/strong>. See the second page of the technical data sheet<\/a> for technical recommendations on applied thermal calculations for Manti Ceramic High Density.<\/p>\n Manti Ceramic Medium Density is a semi-liquid version indicated for thin applications, thermal bridges, mouldings, architectural reliefs, ceilings and complex geometries.<\/p>\n It is useful when roller or spray application makes it possible to treat difficult surfaces or details that could not be addressed with traditional panels. Here, the documentation check mainly concerns reduced thickness, continuity of the coating film, substrate and application conditions.<\/p>\n Thermal conductivity: \u03bbd = 0.0010 W\/mK, certified by T\u00dcV – Test R1274851-2.<\/strong><\/p>\n Low Density Transparent is indicated for surfaces where the original appearance of the material needs to be maintained, such as stone, marble, exposed brick or architectural details.<\/p>\n It may be considered for small visible thermal bridges when an opaque product is not compatible with the aesthetic requirement. In this case, the technician must also consider the porosity of the substrate and the final aesthetic result.<\/p>\n Manti Ceramic Technological M is designed for technical and industrial surfaces: roofs, sheet metal, wood, plastic, cement, containers, cells, systems and surfaces where low-thickness thermal insulation and waterproofing are required.<\/p>\n The documentation must be checked in relation to the non-masonry substrate, exposure, substrate preparation and the intended application method.<\/p>\n The DoP, when required for the specific product, should therefore not be treated as an isolated document, but connected to the Manti Ceramic version actually selected and to the other available technical documents.<\/p>\n Manti Ceramic is suitable for low-thickness nanotechnology insulation interventions on fa\u00e7ades, residential buildings, complex surfaces and indoor environments.<\/p><\/div>\n The link between Manti Ceramic and technical documentation becomes decisive mainly in four situations.<\/p>\n Low-thickness energy retrofit.<\/strong> The designer must understand which data to use in calculations and whether they are consistent with the thickness that can actually be applied.<\/p>\n Correction of thermal bridges.<\/strong> The contractor must be able to follow a clear application cycle, because the result depends on the continuity of the treatment and its connection with adjacent surfaces.<\/p>\n Protected fa\u00e7ades or complex surfaces.<\/strong> Documentation helps justify the choice of a low-thickness solution when traditional external insulation is invasive or cannot be applied.<\/p>\n Industrial or non-traditional substrates.<\/strong> For roofs, sheet metal, plastics, wood or containers, it is not enough to reason as if working on civil masonry: specific indications are needed for adhesion, substrate preparation, application and protection of the system.<\/p>\n In all these cases, technical documentation, including the DoP for Manti Ceramic nanotechnology insulation, helps professionals and contractors choose the correct version, avoid improper comparisons and reduce the risk of inconsistent applications.<\/p>\n No. Documentation must always be checked for the specific Manti Ceramic version selected and for its related field of use. It is not correct to treat the range as if it were a single product. There is a DoP for each product in the range.<\/p>\n According to European Regulation 3110\/2024, the DoP is mandatory and must be published. The DoPs for Manti Ceramic products are published on the manufacturer\u2019s website and on the websites of the distributor Savenergy.it Srl.<\/p>\n Manti Ceramic High Density is indicated for internal and external masonry when low-thickness paste insulation is required.<\/p>\n Manti Ceramic Medium Density is indicated for thermal bridges, mouldings, ceilings and difficult surfaces. Low Density Transparent may be considered for small visible details.<\/p>\n No. Technological M is mainly designed for technical and industrial surfaces. It must be assessed in relation to substrates such as sheet metal, roofs, plastics, wood, cement, containers and systems.<\/p>\n The technician should identify the correct version, the specified thickness, the substrate, the application cycle and the documentation available for that specific use.<\/p>\n The DoP for Manti Ceramic should not be read as a simple commercial data sheet, but as a technical document declaring performances, characteristics and references useful for the correct assessment of the product in the construction sector.<\/p>\n To assess the available technical documentation and identify the most suitable Manti Ceramic version for a building intervention, thermal bridge correction or low-thickness energy retrofit, it is possible to contact Savenergy.it at info@manti-ceramic.com<\/a><\/strong>.<\/p>\n Savenergy.it provides technical support for professionals and contractors on products, fields of use, substrate preparation, correct application and documentation available for the specific project.<\/p>\n To explore more applications and practical case studies,<\/strong>\u00a0you can visit our\u00a0LinkedIn<\/span>\u00a0https:\/\/www.linkedin.com\/company\/savenergy-it-srl-holding\/<\/span><\/a><\/p>\nSynthetic index – DoP for nanotechnology insulation<\/h2>\n
\n
Why discuss the DoP when choosing nanotechnology insulation<\/h2>\n
![\"DoP](\"https:\/\/www.manticeramicitalia.it\/wp-content\/uploads\/2026\/05\/dop-for-nanotechnology-insulation-manti-ceramic.webp\")
<\/a><\/p>\nThe technical point: technical documentation, DoP, product and application must match<\/h2>\n
\n
Manti Ceramic: documents and selection criteria for each version<\/h2>\n
Manti Ceramic High Density<\/h3>\n
Manti Ceramic Medium Density<\/h3>\n
Low Density Transparent<\/h3>\n
Manti Ceramic Technological M<\/h3>\n
![\"Manti](\"https:\/\/www.manticeramicitalia.it\/wp-content\/uploads\/2026\/05\/Manti-Ceramic-Thermal-Coating.png\")
Where documentation really affects the project<\/h2>\n
FAQ<\/h2>\n
Is there only one DoP for all Manti Ceramic nanotechnology insulation products?<\/h3>\n
Is the DoP for nanotechnology insulation always mandatory and must it be published?<\/h3>\n
Which Manti Ceramic should be assessed for internal and external masonry?<\/h3>\n
Which Manti Ceramic should be assessed for thermal bridges and complex geometries?<\/h3>\n
Does Technological M fall under the same assessment as civil masonry?<\/h3>\n
What should a technician ask before specifying Manti Ceramic in a project?<\/h3>\n
Conclusion – DoP for nanotechnology insulation<\/h2>\n
![\"\"](\"https:\/\/www.manticeramicitalia.it\/wp-content\/uploads\/2026\/04\/contact-us.png\")
<\/a><\/p>\n